TL;DR
Sisters has been building fast. The town roughly tripled in population between 2000 and 2020, and Census estimates count about 245 homes built since 2020 alone. If you are moving into a new build or finishing a remodel, the contractor's final sweep rarely leaves a home ready to live in. A post-construction clean typically clears the fine drywall dust, sawdust and sticker residue that settle into every ledge, vent and window track. The price box on this page gives you a price for your home.
Building in Sisters. The City of Sisters had 959 residents in 2000 and 3,064 in 2020. Its median home was built in 2010, the newest of the four Deschutes County towns, and about 68% of its housing dates from 2000 or later. The 97759 ZIP also includes Black Butte Ranch and Tollgate, where remodels of older cabins and homes are common.
Why isn't the builder's final clean enough?
Most construction contracts end with a "broom clean" or rough clean: debris hauled away, floors swept, big messes gone. That is a reasonable handoff for a builder. It is not the same as a home where you'd want to unpack dishes or let kids crawl on the floor.
The gap is fine dust. Sanding drywall and cutting trim make particles light enough to float for hours before settling on every flat surface, inside cabinets, in HVAC ducts and in window tracks. New mountain-style homes around Sisters add to it with features that trap dust: exposed beams, vaulted great rooms, stone fireplaces and long runs of windows facing the Three Sisters.
New build
A whole house of fresh dust, protective film on windows and appliances, paint specks, labels on fixtures, and grit ground into brand-new floors from crews working through the wet season.
Remodel
Dust that escaped the work zone into lived-in rooms, plus the finished space itself. Older homes in the small downtown core and remodeled cabins at Black Butte Ranch often need extra care on original wood.
What makes a Sisters job site different?
A few local conditions show up on almost every project here.
| Local factor | Effect on the clean |
|---|---|
| Volcanic pumice soil | Central Oregon sits on a pumice-mantled plateau from the Mount Mazama eruption. Bare lots on new builds are fine, light soil that is easily tracked in on boots. |
| Ponderosa lots | In Tollgate, Crossroads and other wooded areas, needles and bark end up inside through open doors during construction. |
| Wet shoulder seasons | Sisters gets about 15.2 inches of precipitation a year, more than nearby towns, so muddy boot traffic is common from fall through spring. |
| Wood stoves and hearths | New stone or brick hearths collect mortar dust and grout haze. No home in the city is on piped gas, so many new builds include a stove. |
| Large windows | Window tracks and sills collect the most dust and need the most detail time. |
When should the clean happen?
Timing is the biggest decision. Clean too early and trades undo the work. Clean too late and you are unpacking into dust. For most homeowners, the right moment is after the last trade has finished and before furniture arrives.
Construction cleaning is often described in phases: a rough clean during the build, a final clean after the trades are done, and a touch-up right before move-in. Our guide to post-construction cleaning phases explains each one. As a homeowner, you usually care most about the final clean and the touch-up.
Hazardous debris is a separate job. Dust from sanding or demolition in older homes can contain lead paint or asbestos, depending on the home's age. Testing and abatement belong to licensed specialists and must be done before any general cleaning. Leftover construction debris, like lumber and drywall scraps, is the builder's or a hauler's job.
How do you prepare the house for a post-construction clean?
Prep steps for a new build or remodel
Confirm with your builder that all trades are finished, including touch-up paint and final electrical. Have construction debris hauled away first. Run the HVAC with a fresh filter, then change it again after the clean, since the first filter catches a lot of dust. Leave the protective film on appliances until the crew arrives if you want it removed as part of the clean. Share gate codes or lockbox details, since many new builds sit on acreage.
Scheduling matters more in Sisters than in bigger towns. Summers are busy with visitors, and projects tend to finish in late spring or summer so owners can move in during good weather. Booking the clean when you set your closing or move-in date avoids a gap.
For the bigger picture, see deep cleaning in Sisters or the deep cleaning service page.
Price your new build or remodel. Size, condition and what you want covered set the number. Enter 97759 in the price box on this page, or start a quote.
FAQ
Is the builder's final clean the same as a post-construction clean?
Usually not. Most contracts end with a broom clean that removes debris and sweeps floors. A post-construction clean goes after the fine dust in cabinets, vents, window tracks and on high surfaces so the home is ready to live in.
When should I book post-construction cleaning in Sisters?
Book it after the last trade has finished and before furniture arrives. Setting the date when you schedule your closing or move-in helps, especially in late spring and summer when many projects wrap up.
Why is there so much dust on a new build in Sisters?
Drywall and trim work create very fine dust, and bare lots on the pumice-based soil of Central Oregon add tracked-in grit. Vaulted ceilings, beams and big windows give that dust plenty of places to settle.
Can a cleaning crew handle lead or asbestos dust?
No. Testing and removing lead paint or asbestos is work for licensed abatement specialists, and it has to happen before general cleaning. This mostly matters for remodels of older homes.
Does post-construction cleaning include hauling debris?
Hauling lumber, drywall scraps and other construction debris is usually the builder's or a junk hauler's job. Have debris removed before the clean so the crew can reach every surface.
Every home is different, so the real number depends on size, condition, and what you want covered. Get a quote and we will walk you through it.
