Quick Verdict
A small patio set -- table, four chairs, one umbrella -- falls into a standard multi-item furniture pickup. Large sectional patio couches, heavy cast-aluminum dining sets, or fire-pit-included ensembles move into mid-size loads. Most residential outdoor-furniture removals in Oregon run one or two hundred dollars for small sets and scale from there based on volume. Weather-damaged fabric and rusted metal affect disposal routing, not so much the price.
Oregon patio furniture lives outdoors roughly eight months a year and gets stored under tarps the other four. Decomposition is slow but relentless. This guide covers what professional removal looks like, how the pricing breaks down, and when donation is still worth trying.
Patio Furniture Categories, in Pricing Order
Lightweight aluminum and resin. Resin wicker, folding aluminum chairs, lightweight tables. Fastest to load, smallest volume, lowest cost.
Cast-aluminum dining sets. Heavier but still single-person liftable. Common volume profile.
Wrought iron. Dense, heavy, recyclable as scrap. Slower to load but offsets some cost through metal-scrap routing. See our metal scrap value guide for how that math works.
Teak, ipe, and hardwood. Usually the nicest material by the time it is being removed. Heavy, often donatable if not badly weathered.
Sectional outdoor couches. The biggest volume category. Large frames, bulky cushions, weather-saturated fabric.
Fire pits, chimeneas, and masonry pieces. Heavy and slow. Often removed alongside a patio set for combined-visit pricing.
How Removal Actually Runs
A typical visit for a standard patio-set removal:
- Inventory. Crew counts pieces and confirms volume against the quote.
- Cushion separation. Cushions bag separately because fabric goes to a different disposal stream than frames.
- Frame stage. Crew stages frames near the truck for efficient loading.
- Load and strap. Everything loads in one pass. Metal goes to scrap; wood and plastic route to the appropriate stream.
Total time: 30 minutes for a single-set job; 1 to 2 hours for a larger combined load with a fire pit or sectional.
Industry Baseline Range
Industry Baseline Range
| What is being priced | Published national range |
|---|---|
| Furniture removal, per job | $75 to $250 |
| Furniture removal, national average | $180 |
Source: Angi, "Furniture Removal Cost" national cost guide.
These are industry baseline ranges for planning only and may not reflect Otesse's price. Otesse pricing is calculated for your specific home and ZIP code, so enter your ZIP in the price box on this page for your instant price.
Current Market Reality
Baseline assumes reasonable access (truck parking within carrying distance) and straightforward volume. Real jobs run higher when furniture lives on a second-story deck, when a backyard gate is too narrow for carrying, or when water-saturated sectional cushions have tripled in weight. Photo-based quotes capture most of these factors; on-site assessment is best for dense or difficult-access yards.
| Pushes the price up | Pulls it down |
|---|---|
| More volume, a bigger share of the truck | A few items, a small share of the truck |
| Heavy material such as concrete, dirt, roofing, or tile | Light, bulky items |
| Items with disposal surcharges, like mattresses, tires, and refrigerant appliances | Items that can be donated or recycled |
| Stairs, long carries, and tight access | Items staged in a garage or near the curb |
| Disassembly before loading | Items ready to lift and carry |
Every home is different, so the real number depends on what goes, how much of it, and how easy it is to reach. Enter your ZIP in the price box on this page for your instant price.
Weather Damage and What It Changes
Weather damage does not usually raise the labor price -- it raises the disposal routing care.
UV-degraded plastic and resin. Brittle, often breaks during loading. Most crews handle it with gloves and load carefully to avoid scattering plastic fragments.
Rusted metal. Still recyclable as scrap if cleaned of fabric and foam. Crews separate mid-load.
Water-saturated cushions. Heavier, sometimes moldy. Cushions go into bags rather than directly into the truck bed.
Moss-grown surfaces. Common in Willamette Valley yards. Moss adds weight but not cost; crews rinse surfaces on-site if needed before loading.
Mildewed fabric. Routes to a separate stream from clean fabric. Mention mildew at quote time so the crew brings the right bags.
Donation vs Haul: When to Try Which
A dense set of rules from years of Oregon cleanouts:
- Teak and hardwood under 5 years with minimal weathering: Donate. Local buyers active.
- Cast-aluminum sets in good condition: Donate if cushions are clean; haul if cushions are shot.
- Any resin wicker over 3 years: Haul. Donation demand is low, and weather damage shows quickly.
- Sectional outdoor couches with fabric damage: Haul. Reupholstering costs more than replacement.
- Wrought iron at any age: Haul with scrap routing; donation demand is minimal because wrought iron is heavy and many buyers cannot transport it.
See our donate vs dump framework for the broader decision flow, and furniture removal guide for indoor parallels.
Oregon-Specific Considerations
Coastal properties. Salt-air exposure accelerates metal corrosion dramatically. Coastal patio sets often have more scrap routing and less donation viability.
Valley rain damage. The Willamette Valley's wet months cause cushion-core saturation. By year two, cushion foam is usually past the point of cleaning.
Mountain property wildlife damage. Central Oregon and coastal-range properties sometimes have chew damage from deer, squirrels, or rodents on cushions and umbrellas. This is haul-only.
Pollen staining. Not a cost factor, but worth noting for donation photos -- dust and pollen wash off but make furniture look worse in listing photos than it actually is.
The Single-Item Question
A single patio chair often falls under single item pickup pricing, which is its own category. If you only have one piece, ask whether the crew has a nearby job to combine it with -- that usually reduces the effective cost.
How to Prepare
- Stage pieces in one spot near the truck path.
- Bag cushions separately if they are wet or moldy.
- Remove any hardware you want to keep (table glass, decorative finials).
- Check umbrellas for still-functional poles or bases worth saving.
- Disconnect propane tanks from fire pits or patio heaters and set them aside (tanks require separate disposal, not bulk haul).
FAQ
Can you take a propane tank with the fire pit? Not inside the pit. Full or partial tanks require separate hazardous-waste handling at a county facility.
What about umbrella glass tables? Most crews handle glass carefully. If the glass is broken or cracked, mention it at quote time -- it affects loading technique.
Will you haul a covered set that has been stored for years? Yes. Long-stored furniture often has rodent nests or spider colonies; the crew expects this.
Do you take patio cushions separately? Yes, but cushions-only service is priced as a small-load visit, not by the piece.
Ready to Book?
For patio furniture removal, see Otesse. Enter your ZIP in the price box to see which services are available at your address. See our furniture removal cost guide for indoor companion pricing, or send photos of your set for the fastest quote.
